Discovery 1 Brake Parts

This original equipment (wabco) brake vacuum pump fits all 300 TDI engines.

Brake disc to fit the front of all Discovery 1's, Range Rover Classics (from 1986), Defenders, and 90 and 110's with SOLID front discs.

Brake disc to fit the rear of all Discovery 1's, Range Rover Classics (from 1986), Defender 90's with SOLID rear discs.

Brake disc to fit the front of all Defenders, Range Rover Classics, Discovery's, and 90 and 110's with VENTED front discs.

This Terrafirma Stainless Steel Brake Hose Set is for standard height  Discovery 1 vehicles up to KA chassis number without ABS.

This Terrafirma Stainless Steel Brake Hose Set is +50mm for raised Discovery 1 vehicles MA chassis number onwards WITH ABS.

This Terrafirma Stainless Steel Brake Hose Set is for standard height Discovery 1 vehicles MA chassis number onwards WITH ABS.

This Terrafirma Stainless Steel Brake Hose Set is for standard height  Discovery 1 vehicles with KA & LA chassis numbers.

This Terrafirma Stainless Steel Brake Hose Set is +50mm for raised height  Discovery 1 vehicles with KA & LA chassis numbers.

This Terrafirma Stainless Steel Brake Hose Set is +50mm for raised height  Discovery 1 vehicles up to KA chassis number without ABS.

This Terrafirma Stainless Steel Brake Hose Set is for standard height vehicles & fits Discovery 1 vehicles MA Chassis onwards without ABS brakes.

This Terrafirma Stainless Steel Brake Hose Set is +50mm for raised Discovery 1 vehicles MA chassis number onwards without ABS

This O.E front anti-lock brake sensor fits all Discovery 1 models, it comes with bush and grease. (1 per side).

Brake Caliper Piston & Seal Repair Kit Disco up to KA034313

This O.E master cylinder fits all Discovery 1 models fitted with anti-lock brakes.

This metric brake pipe nut fits all Discovery 1 flexi hoses.

This brake servo fis all Discovery 1 models.

This metric "T" piece fits the rear of all Discovery 1 models without ABS.

This brake pad fitting kit fits the front of Discovery 1 models up to chassis number KA034313 & Range Rover Classic up to FA399972. (STC9187LH Pads) includes 4 pins & clips.

This brake pad fitting kit fits the front of Discovery 1 models from chassis number KA034314 & Range Rover Classic From GA399973 with vented discs, includes 4 pins, springs and split pins.

This Lockheed front axle set of brake pads fits all Discovery 1 models up to chassis number KA034313 (split pin fixing).& Range Rover Classic up to FA399972.  NOTE: May also need fitting kit STC8573.

This front flexi brake hose fits all Discovery 1 Models up to chassis number JA034313 (male ends).

This Lockheed front axle set of brake pads fits all Discovery 1 models from chassis number KA034314 (solid pin fixing) with wear sensors.& Range Rover Classic From GA399973.

This Lockheed front axle set of brake pads fits all Discovery 1 models from chassis number KA034314 (solid pin fixing) without wear sensors. NOTE: May also need fitting kit.

These Delphi (Lockheed) boxed discs are for the front of all Discovery 1 models & Range Rover Classic up to FA399972. with solid front discs.

These replacement discs are for the front of all Discovery 1 models & Range Rover Classic up to FA399972.  with solid front discs.

These Delphi (Lockheed) boxed discs are for the front of all Discovery 1 models & Range Rover Classic From GA399973 with vented front discs.

These replacement discs are for the front of all Discovery 1 & Range Rover Classic From GA399973 models with vented front discs.

These replacement discs are for the rear of all Discovery 1 models & Range Rover Classic up to HA610293.

This brake pad fitting kit fits the rear of Discovery 1 models & Range Rover Classic up to HA610293.

This rear axle set of Lockheed brake pads fits all Discovery 1 & Range Rover Classic up to HA610293 models with pad wear sensors NOTE: May need fitting kit STC8574

These Delphi (Lockheed) boxed discs are for the rear of all Discovery 1 models & Range Rover Classic up to HA610293.

This rear anti-lock brake sensor fits all Discovery 1 models, it comes with bush and grease. (1 per side, comes as a pair).

Copper Brake Pipe Kits for Land Rovers.

Suitable for 200TDI models only.

This O.E master cylinder fits all Discovery 1 models without anti-lock brakes from chassis number MA081992 onwards.

This front flexi brake hose fits all Discovery 1 Models from chassis number KA034314 onwards (female ends).

This rear flexi brake hose fits all Discovery 1 Models.