Soft Top Front Seat Belt Bar
Ref: EXT500-1
Product Description:
The soft top seat belt bar is designed to allow for easy fitting of 3 or 4 point inertia seat belts that longer have a high mounting point available, especially if you have converted from a hard top to a soft top.
To install, simply locate the outer flat plates onto the top body capping as shown in images below and line up the rear bar with the side capping point. Drill and bolt into place either side to create a top mounting.
If you require a new seat belt you will need a 4 door front inertia belt to do this job properly and NOT a 2 door belt. The brackets you require are correct on the 4 door inertia belt. Exmoor part no.EXT001-8 =LH or EXT001-7=RH
The inertia reel mounts to the lower point and shown with the top buckle above.
This is a great kit and offers a very easy way to convert seat belts safely when modifying your vehicle without the need to install a roll bar if not required (fitting time for bar is about 30 min).
Click here to see trim swatchesPlease Note: Although we hold a large range of Exmoor Trim products in stock we can not cover the entire product range due to the options and variations available. If we have the items in stock we will despatch within 48 hrs.
If the seats that you want are not in stock these can be produced in around 14 working days.
If the Hood that you want is not in stock then these can be produced in around 14 to 21 working days.
If your ordered item is not in stock, you will be contacted with an ETA asap via email.
All Exmoor Trim products are hand made to the highest standardFor larger items or bulk purchases the carriage costs may alter after order has been placed due to parcel volumes. If this is the case you will be contacted ASAP by a member of our team to discuss the options available to you. We will not dispatch the goods until we have contacted you and discussed the carriage charges.
Price: £112.50 / €139.30 excl. VAT (excluding VAT at 20.00%)
(For other currencies use our Currency Converter)
