News Category: lrparts


Sway Bar Stabiliser Kit

SuperPro Sway Bar Link Kit

10mm Ball Joint Adjustable Link
Minimum Length 210 mm – Ma

Sway Bar Stabiliser Kit

SuperPro Sway Bar Link Kit

10mm Ball Joint Adjustable Link
Minimum Length 210 mm – Maximum Length 260 mm

Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits

  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles

SuperPro Tip –┬áTo get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Fitting Instructions;


Control Arm-/Trailing Arm Bush

SuperPro Bushing Kit

  • Fitting Position: Front
  • 2.5hrs Fitment Time
  • Fitment Difficulty
  • Axle alignment required after fitting

Fitting Instructions


Control Arm-/Trailing Arm Bush

SuperPro Performance Handling Kit

Alignment Correction. Caster Adjustment

Vehicle Application Information:

  • up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved ‘return to centre’ feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Vehicle Application Information:

  • Performance Handling Kit
  • 2.5hrs Fitment Time
  • Fitting Position: Front
  • Axle alignment required after fitting
  • Fitment Difficulty

Fitrting Instructions;


Control Arm-/Trailing Arm Bush

SuperPro Bushing Kit

Standard Replacement

  • Fitment Difficulty
  • Fitting Position: Front
  • Axle alignment required after fitting
  • 2.5hrs Fitment Time

Fiting Instructions;


Pioneering Style & Comfort

Introducing the Premium High back seats for the rear passengers in 109, 110 & 110″ crew cab Land Rovers fitting all Series II & III also all Defender including the new Puma TDCi.

These new style high back seats come with all the hardware you need to install and could not be easier to fit with all the under body mounting plates once you have removed your old seats. The seats utilise the existing second row seat belt configuration so there is no need to adapt your belts, unless you are upgrading a puma defender then new stalks and centre belt will be required.

The headrests are easily removable and all 3 seats are supplied with headrests.

FEATURES

One of the key features of these seats is the adaptations in use, for instance you can safely install just 2 outer seats only and allow access through the centre to the rear seats or simply just install one. All these seats are available as either left hand outer, centre & right hand outer. The seats are also very supportive and extremely comfortable for long journeys.

These options make the seats very versatile and offer increased leg room and good head height with the ability to fold the seat backs down flat against the base if you require extra space for loading larger items (you may need to remove the headrests depending on your front seat position).

With only 2 seats installed fitting of a centre storage box is a great idea or simply leaving a gap for rear access is great with 2 of our rear Lock & Fold seats

Key features

  • Extra leg room
  • Rear storage pockets
  • Individual Seat back adjustment
  • Adjustable twin stalk removable headrest
  • Fold down seat backs
  • Configuration options
  • Easy to install

NOTE: if you are considering installing these seats into a Puma TDCi from 2007 onwards your centre seat belt and outer buckles are part of your seats. You will be required to install a centre second row belt and a pair of floor mounted buckles.

The outer inertia 3 point belts remain in place so there is no need to change these at all.


The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.

The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.

Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way.

Features:

  • Twin cup holders
  • Extra padded lid for comfort
  • Padded sides for an all over softened feel adding to the quality of this product
  • High-Quality full-width lid hinge in black with an anti-rattle lid latching
  • Genuine Land Rover locking lid latch
  • Secure and solid installation
  • Designed to provide maximum storage at the correct height for armrest and posture
  • Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.

Style:

  • Available in all our trim options to match any interior
  • Available in our full range of Scottish Leather
  • Personalise colour schemes and stitching.

Specifications:

  • Fits between all OEM and Exmoor seats in the front of any Land Rover
  • Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
  • Fits the original fittings for Defender or Puma vehicles
  • In many cases, you will not need to drill for fitting – if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
  • Other models may require drilling; locking nuts are supplied as standard
  • Internal fittings are neatly hidden once fitted
  • Fitting time with factory fitting points approx 20 minutes
  • If drilling is required allow 1 hour – enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.

The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.

The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.

Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way.

Features:

  • Twin cup holders
  • Extra padded lid for comfort
  • Padded sides for an all over softened feel adding to the quality of this product
  • High-Quality full-width lid hinge in black with an anti-rattle lid latching
  • Genuine Land Rover locking lid latch
  • Secure and solid installation
  • Designed to provide maximum storage at the correct height for armrest and posture
  • Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.

Style:

  • Available in all our trim options to match any interior
  • Available in our full range of Scottish Leather
  • Personalise colour schemes and stitching.

Specifications:

  • Fits between all OEM and Exmoor seats in the front of any Land Rover
  • Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
  • Fits the original fittings for Defender or Puma vehicles
  • In many cases, you will not need to drill for fitting – if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
  • Other models may require drilling; locking nuts are supplied as standard
  • Internal fittings are neatly hidden once fitted
  • Fitting time with factory fitting points approx 20 minutes
  • If drilling is required allow 1 hour – enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.

The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.

The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.

Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way.

Features:

  • Twin cup holders
  • Extra padded lid for comfort
  • Padded sides for an all over softened feel adding to the quality of this product
  • High-Quality full-width lid hinge in black with an anti-rattle lid latching
  • Genuine Land Rover locking lid latch
  • Secure and solid installation
  • Designed to provide maximum storage at the correct height for armrest and posture
  • Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.

Style:

  • Available in all our trim options to match any interior
  • Available in our full range of Scottish Leather
  • Personalise colour schemes and stitching.

Specifications:

  • Fits between all OEM and Exmoor seats in the front of any Land Rover
  • Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
  • Fits the original fittings for Defender or Puma vehicles
  • In many cases, you will not need to drill for fitting – if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
  • Other models may require drilling; locking nuts are supplied as standard
  • Internal fittings are neatly hidden once fitted
  • Fitting time with factory fitting points approx 20 minutes
  • If drilling is required allow 1 hour – enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.

The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.

The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.

Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way.

Features:

  • Twin cup holders
  • Extra padded lid for comfort
  • Padded sides for an all over softened feel adding to the quality of this product
  • High-Quality full-width lid hinge in black with an anti-rattle lid latching
  • Genuine Land Rover locking lid latch
  • Secure and solid installation
  • Designed to provide maximum storage at the correct height for armrest and posture
  • Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.

Style:

  • Available in all our trim options to match any interior
  • Available in our full range of Scottish Leather
  • Personalise colour schemes and stitching.

Specifications:

  • Fits between all OEM and Exmoor seats in the front of any Land Rover
  • Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
  • Fits the original fittings for Defender or Puma vehicles
  • In many cases, you will not need to drill for fitting – if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
  • Other models may require drilling; locking nuts are supplied as standard
  • Internal fittings are neatly hidden once fitted
  • Fitting time with factory fitting points approx 20 minutes
  • If drilling is required allow 1 hour – enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.

The premium cubby will fit all Defenders and is available in various trims and comes with all fixings required, this will also fit Series vehicles.

The Premium XL Cubby box is part of our new redesigned Premium range of seating and is for those who are looking to make the inside of their Defender more luxurious. The Premium Cubby has a 50mm padded lid which is at the correct height for improved comfort and arm support between the seats. The Cubby has 22 litres of spacious storage, is fully carpet lined, for opulence, and includes a clip catch to help prevent lifting and rattling.

Choose from our range of standard trim or personalise with our full range of Scottish leathers. Guaranteed attention to detail every step of the way.

Features:

  • Twin cup holders
  • Extra padded lid for comfort
  • Padded sides for an all over softened feel adding to the quality of this product
  • High-Quality full-width lid hinge in black with an anti-rattle lid latching
  • Genuine Land Rover locking lid latch
  • Secure and solid installation
  • Designed to provide maximum storage at the correct height for armrest and posture
  • Leaves plenty of clearance in front of the hi-low gear shift to operate easily within the Puma.

Style:

  • Available in all our trim options to match any interior
  • Available in our full range of Scottish Leather
  • Personalise colour schemes and stitching.

Specifications:

  • Fits between all OEM and Exmoor seats in the front of any Land Rover
  • Fits all models of Land Rover from Series II, IIA, III. Defender & Puma
  • Fits the original fittings for Defender or Puma vehicles
  • In many cases, you will not need to drill for fitting – if your centre inspection plate has pre-fitted captive nuts the box automatically lines up with these original fitting points
  • Other models may require drilling; locking nuts are supplied as standard
  • Internal fittings are neatly hidden once fitted
  • Fitting time with factory fitting points approx 20 minutes
  • If drilling is required allow 1 hour – enrol additional help; you will need a to hold a spanner on the underside of the centre floor plate.