It’s been a while since we caught up with James, our man who has set out to create his dream Defender – a County with a TD5 engine and a remit of “No more rust“. And seeing as we’ve recently sent him out a load more Land Rover parts we thought it was time for an update…
If you missed the first edition, you can find it by clicking here
And where better to start than with his fantastic looking galvanised chassis from one of our suppliers which is surely the dream purchase for and Landy Lover – and fully personalised to specifications, too.
The dream of any Landy restorer, a galvanised chassis
And if you thought it looked great when untreated, you’re in for a treat with the picture below which shows James’ rust-beating chassis with a sharp paint job looking great in the British sunshine. “The chassis is a lovely piece of kit, and first hand I can tell you that it all fits and lines up perfectly so far. It was T-washed and self etched primed, then painted in Jotun conceal a marine based paint.” James explains.
James’ galvanised Defender 90 chassis fully painted
Once the Landy had been stripped down (as seen in part one) and the paint had gone on the chassis it was time to reassemble Andy the Landy and get stuck into the best part of any project – seeing it come back to life – exactly how you want it.
Terrafirma shocks with calipers and Allmakes’ discs fitted
James said, “Andy is now back on his wheels (pics below) with fuel lines in place and brake lines to the front, the only hitch so far was putting the central cross member in place the wrong way round!!” We all make mistakes from time to time but surely James can be forgiven once you’ve seen how good his front Terrafirma Springs, shocks, tubular turrets and securing rings look along side his shiny calipers and discs.
The Defender rebuild at the perfect height to inspect the shocks and discs
And James explained that they really caught the eye of passers by and visitors before the wheels went on, as they were perfect eye-line height as he was working on them as shown above, you can see the Cross-grooved and drilled discs from Allmakes 4×4.
Bolts on and ready to rumble
So here we are at the moment, as you can see above is the front of the rebuild, with the Terrafirma steering damper and wheels proudly on display, and below is the rear view.
Front end of the 90’s Chassis with Terrafirma steering damper fitted
And what are the next steps for Andy the Landy? “Engine and gearbox should go in soon then exhaust, and rover drive. Have put the new flywheel and clutch. Just cleaning up the engine and box and fitting new coolant hoses of which Dan sourced the last one this morning.” James explains.
Rear end of the Defender 90 chassis with Terrafirma gear on
So keep checking back to see further progress on this build as we’re starting to get into the exciting bit now! What colours will James opt for? What other accessories will be put on? Will he hit his target of September?
Next time we can reveal that the gearbox is in, exhaust is on and James has been having fun with the TD5’s wiring loom.