This allows owners with air suspension to take full advantage of LINX’s Airbag Suspension Module providing the ability to independently adjust the pressure and ride height in each airbag. Perfect for when loads are added to a vehicle unevenly, levelling the vehicle from side to side (left to right) becomes a simple on-display adjustment.
Monthly Archives: March 2018
Offering ‘set & forget’ simplicity to tyre inflation as well as remote control over your airbag suspension, the optional LINX Pressure Control Kit (coupled with an ARB air compressor) allows you to take full advantage of LINX’s Pressure Control Module. Perfect for the easy and accurate adjustment of tyre pressures or controlling a set of air bags. The wireless LINX’s mobile display means you can be in control from either within or out of the vehicle at up to 10m away.
Handy little kit to help pass an airline through any panel. 5mm to 3.5mm O-ring type.
Suitable for DA8925
For additional strength. Off-road or under extreme conditions.
Awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off-road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted. Bracket is 50mm wide. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. Available in the UK only.
Specially designed to work with diffs and ARB air lockers.
> Specifically engineered to work with differentials and ARB Air Lockers
> Compact and lightweight design with push-in fittings for simple installation
> Four breather ports for multiple applications
> Mounting holes will accommodate M6 bolt or stud
> Splash resistant air filter with washable high flow sintered bronze filer cartridge
> Oil, water and heat resistant 8mm polyurethane tubing reduces likelihood of oil blockages
1 x Anodised aluminium manifold
1 x Air filter
1 x 8mm x 8m polyurethane tubing
4 x 8mm-1/8”BSP push-in fittings
3 x 1/8”BSP plugs
2 x Self-tapping screws
10 x Cable ties
Available in the UK only.
Lift – Up to 40mm
- Discovery 2
Spring rate – 290lbf/in / 51N/mm
Free height – 425mm
Load – Medium
> Manufactured from state of the art micro-alloyed spring steel for superior strength and durability.
> Double scragged before and after shot peening to reduce spring stress and enhance spring life.
> Exceptional resistance to sagging and corrosion.
> Springs are designed for each vehicle to match the spring to the specific applications.
> Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency.
> Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle.
> Durable, hard wearing black powder coat.
> Designed and manufactured in Australia.
Enhance your vehicle’s interior with a set of these leather cover gear levers. Easy to fit.
- Defender – 2007 onwards