Monthly Archives: September 2016


Spring rate – 680lbf/in   /   119N/mm

Free height – 370mm

Load – medium

> Manufactured from state of the art micro-alloyed spring steel for superior strength and durability.
> Double scragged before and after shot peening to reduce spring stress and enhance spring life.
> Exceptional resistance to sagging and corrosion.
> Springs are designed for each vehicle to match the spring to the specific applications.
> Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency.
> Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle.
> Durable, hard wearing black powder coat.
> Designed and manufactured in Australia.

Notes
Caution: Due to altered gearbox mounts on models after 1998 any lift above.
OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft.
On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
Important: DA8922 has reduced spring rate from OE to provide improved ride quality for light loads.
Available in the UK only.


Front suspension, lower arm, front bush removal & installer tool

Equivalent to OEM 204-536

  • Discovery 3
  • Discovery 4
  • Range Rover Sport – 2005 – 2013

Designed to remove and refit the front suspension bush of the lower arm with the minimum of dismantling.


Rear suspension, upper hub bush removal & installer tool

Equivalent to OEM 204-530

  • Discovery 3
  • Discovery 4
  • Range Rover Sport – 2005 – 2013

Designed for OEM bush RHF500100. Can be used in situ which saves time and reduces the dismantling required.


Rear suspension, upper hub bush removal & installer tool

Equivalent to OEM 204-515.

  • Range Rover L322 – 2002 – 2012

The lower hub bush tool (DA7463) and the upper hub bush tool (DA7466) have been developed to allow the technician to remove and refit these rear suspension bushes with the minimum of dismantling required. Being able to perform the task on the vehicle saves considerable time over the more traditional use of a workshop press and the requirement that the hub be completely removed. For reference, the DA7463 bush tool (OEM equivalent 204-516) has been specifically designed to work with OEM bush RBK500220, and the DA7466 bush tool (OEM equivalent 204-515) has been specifically designed to work with OEM bush RHF000260.


Rear suspension, lower hub bush removal & installer tool

Equivalent to OEM 204-516

  • Discovery 3
  • Discovery 4
  • Range Rover Sport – 2005 – 2013
  • Range Rover L322 – 2002 – 2012

The lower hub bush tool (DA7463) and the upper hub bush tool (DA7466) have been developed to allow the technician to remove and refit these rear suspension bushes with the minimum of dismantling required. Being able to perform the task on the vehicle saves considerable time over the more traditional use of a workshop press and the requirement that the hub be completely removed. For reference, the DA7463 bush tool (OEM equivalent 204-516) has been specifically designed to work with OEM bush RBK500220, and the DA7466 bush tool (OEM equivalent 204-515) has been specifically designed to work with OEM bush RHF000260.


Spring rate – 175/200lbf/in   /   31/35N/mm

Free height – 440mm

Defender – 110. Load – Station Wagon

> Manufactured from state of the art micro-alloyed spring steel for superior strength and durability.
> Double scragged before and after shot peening to reduce spring stress and enhance spring life.
> Exceptional resistance to sagging and corrosion.
> Springs are designed for each vehicle to match the spring to the specific applications.
> Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency.
> Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle.
> Durable, hard wearing black powder coat.
> Designed and manufactured in Australia.

Notes
Caution: Due to altered gearbox mounts on models after 1998 any lift above.
OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft.
On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
Important: DA8922 has reduced spring rate from OE to provide improved ride quality for light loads.
Available in the UK only.


Designed to angle out from ARB touring awnings, wind breaks offer additional protection from the rain while also providing extra shade and sun protection. ARB wind breaks are ideal for creating extra protection and storage for items like swags and chairs under the awning. Manufactured from lightweight PU coated 300gsm poly cotton canvas. Waterproof and UV protected with a UVP 50+ rating. Designed to suit ARB awnings. Tie down points for each wind break to further secure the awning. Available in the UK only.

Note – Side awning not included – DA6844


Kit contents –
Link pipe
Y-section
Tail pipe – RH & LH

Lifetime guarantee

Double ‘S’ is recognised as one of Europe’s leading manufacturers of stainless steel automotive components with a wide selection of systems for off-road.

Using only the finest austenitic and ferritic stainless steels and employing the latest in CNC mandrel and empty tube bending, measuring and inspection equipment, means increasingly high levels of product quality.

All Double ‘S’ exhaust systems carry a lifetime guarantee. Double ‘S’ will replace or repair any part of their Stainless Steel Exhaust Systems found defective through corrosion during the period that the system remains the property of the original owner. Provided that the system is inspected by a garage or exhaust fitting centre annually to ensure that the rubber and other mountings are in good condition.


Kit contents –
Front silencer
Link pipe – RH & LH
Tail pipe – RH & LH

Lifetime guarantee

Double ‘S’ is recognised as one of Europe’s leading manufacturers of stainless steel automotive components with a wide selection of systems for off-road.

Using only the finest austenitic and ferritic stainless steels and employing the latest in CNC mandrel and empty tube bending, measuring and inspection equipment, means increasingly high levels of product quality.

All Double ‘S’ exhaust systems carry a lifetime guarantee. Double ‘S’ will replace or repair any part of their Stainless Steel Exhaust Systems found defective through corrosion during the period that the system remains the property of the original owner. Provided that the system is inspected by a garage or exhaust fitting centre annually to ensure that the rubber and other mountings are in good condition.


Kit contents –
Front silencer
Link pipe – RH & LH
Tail pipe – RH & LH

Lifetime guarantee

Double ‘S’ is recognised as one of Europe’s leading manufacturers of stainless steel automotive components with a wide selection of systems for off-road.

Using only the finest austenitic and ferritic stainless steels and employing the latest in CNC mandrel and empty tube bending, measuring and inspection equipment, means increasingly high levels of product quality.

All Double ‘S’ exhaust systems carry a lifetime guarantee. Double ‘S’ will replace or repair any part of their Stainless Steel Exhaust Systems found defective through corrosion during the period that the system remains the property of the original owner. Provided that the system is inspected by a garage or exhaust fitting centre annually to ensure that the rubber and other mountings are in good condition.